2026 Vexus AVX1985s 

2026 Vexus AVX1985s

ABOUT THIS MODEL

With huge front and rear decks, a wide-open cockpit, tons of rod and gear storage, seating for five, and a tour-level penchant for performance, the AVX1985s is a fish-focused getaway carefully crafted for the whole family. Whether you’re chasing elusive musky, trophy bass, or just relaxing with the kids during a weekend of watersports, this V2 aluminum rig is infused with confidence and unparalleled versatility. Bow to stern, it’s an ideal rig for multiple species.

Built on a big water frame with an ultra-stable 96” beam, the 1985s is 19-feet, 8-inches of deep-forged muscle. The responsive, 200-rated hull carries a beam-forward design, Trac-tight™ handling, stretch-formed gunnels, weather-sealed compartments, and a host of fiberglass infused parts. The 40-gallon fuel capacity is positioned on the center line in the floor. It’s an advanced composition delivering impressive stability, more room, and responsive handling while also reinforcing our smooth, rough water ride. From launch to load, this is a sleek, gutsy machine with serious good looks and legendary attention to detail.

Inside this all-out design, there’s a long list of features and advantages. The front deck is massive, and the bow station is equipped with your choice of trolling motor and electronics. The forward layout also includes a recessed trolling motor pedal, integrated Nav lights, remote switches, and cup and tool holders. Weather-sealed storage dominates the sprawling forward deck with the center rod and gear box measuring a full 9 feet.

Beneath the center compartment another hatch provides easy access to the trolling motor batteries. It’s a setup geared for optimum trolling motor power and efficiency. The port box is engineered with an open boot and room for sticks up to 8 ½ feet in length. Another huge gear compartment balances the starboard side and includes a partition for quick arrangement of go-to tackle. The ultra-wide front deck is further equipped with retractable rod straps and a slot between both consoles and the gunnels. It’s a concept that makes it easy to keep an arsenal of longer rods close at hand.

The cockpit of the 1985s is lined with a quick-drying, super-grip, cushioned floor that’s also available on the front and rear decks. It’s a layout that’s loaded with floor space, allowing quick, fluid movement throughout. At the helm, the dash is lined with speed, tach, fuel, trim, and water pressure instrumentation while also flush mounting up to 12-inch electronics. Just below the driver’s console, a fiberglass side panel houses master switch controls plus a 12-volt plug and USB port. Between the fiberglass consoles, another compartment is fitted with integrated tool holders while doubling as a step to the front deck.

A large glovebox centers the passenger console and keeping with the spacious theme, there’s no shortage of leg room in this rig. Plus, both driver and forward passenger seats are on a slide and swivel base. Looking around the cockpit, cupholders and additional rod and gear storage abounds. Rear compartments are designed with compression locks, weather trim seals, and rapid water evacuation channels. It’s a system that helps keep contents safe and dry.

Looking aft, a pair of custom jump seats are engineered for comfort while folding down to create even more rear deck space. In the hinge-up position, there’s access to both storage and insulated cooler space below. In between these seats is a fiberglass, tour-level livewell with gel-coated interior, filter screens, removable divider, and recirculating aeration.

The rear deck also features more storage, a ski tow mount for the available ski pylon, and quick access to the crank battery, pumps, master switch, and breakers. Your choice of outboards is rigged to a six-inch setback and there’s plenty of room to mount shallow water anchors directly to the transom.

Packed with more of what you’ve been looking for, the AVX1985s includes more storage, comfort, convenience, performance, and standard features. Even the matching tandem axle trailer is loaded with amenities like our Victor Shield™ ultra-resilient frame coating, disc brakes, a swing tongue, custom aluminum wheels, transom tie-downs, spare tire and wheel, and an available bow step.

From unforgettable moments with family and friends to a world of guide trips and incredible triumphs on tour, this rig is more than a total performance design, it has leadership written all over it.

Why We're Different

Vexus® V2 Technology

By incorporating numerous design and manufacturing improvements, we’ve raised the bar in aluminum fishing boats—giving you more room, more strength, and more consistent performance on the water. From the computer-modeled lifting strakes to the integrated spray rails to the additional width at the bow, this next generation of Vexus® boats is ready to excel every time you back one down the ramp.

Beam-Forward Design

The Beam-Forward design of your AVX model works to maximize space, comfort, and convenience while also delivering an incredibly smooth, dry ride. With greater deadrise and a deeper hull, virtually every area of the boat benefits with more deck, floor, cockpit, and storage space.

 

Keel-Mounted Fuel System with Lower Center of Gravity

Your AVX1985s is engineered with a deeper hull and longitudinal fuel tank positioned beneath the floor. The lower center of gravity is combined with raised lifting strakes to deliver confident, responsive handling.

All-Welded High-Performance Pad Hull

Our groundbreaking AVX high-performance pad hull enjoys a running surface with less drag, increased bow lift, and superior overall handling and performance. The manufacturing processes we use create a consistent running surface not found in other brands.

Molded Fiberglass Jump Seats with Under-Seat Storage

Insulated and weather-sealed, the extra under-seat storage and Cold Spot™ cooler are even more examples of the extreme versatility built into this design.

Loaded with Standard Features

You won't see us offering base-level equipment that keeps the starting price artificially low. As avid anglers ourselves, we package the boats like we would want them. You'll find our entire lineup has a stainless-steel propeller, stainless boarding ladder, smooth hydraulic steering, an onboard charger, retractable rod buckles, and a proven Minn Kota trolling motor built into the price.

 

Tournament Grade Fiberglass Livewell

When money's on the line it's comforting to know that our livewell system is designed to keep the day's catch healthy and safe. We incorporate a valve system that makes changes easy, no more sticking your hand in cold water to drain the livewell. Additionally, the well is equipped with recirculating aeration, a pump-out system, and Splash Guard technology.

Cold Spot™ Cooler under Starboard Jump Seat

Our exclusive Cold Spot™ cooler helps keep a long-lasting, polar chill on drinks and snacks. Plus, the under-seat storage makes it convenient to access and doesn’t take up valuable space underfoot.

Custom-Matched Trailer with Victor Shield™ Finish

Don't settle for a trailer built by the lowest bidder. Ours are built in-house, alongside the boat. But we don't stop there. We put four trailer bunks under the boat. Not only does this help cradle your investment when towing, it makes loading at the ramp a breeze. A 4” Channel frame, UV-protected polyurea coating, LED lights, aluminum wheels, surge disc brakes, and matching painted accents complete the overall package.

Stainless Pull-Up Tie Cleats

Stop breaking rods and tearing clothing. Our stainless-steel pull-up cleats stay out of the way until they're needed.

Integrated LED NAV Lights

The aerodynamic form of these integrated bow navigation lights is not only geared to reinforce the sleek lines of your rig but the low-profile design means you’ll never worry with bumping or bending them in the dark.

Oversized Pedestal Bases

Others use a ¾” diameter base to hold the fishing seats in place. We believe in going a step farther. Our 1.77” diameter base is stronger and will last longer.

Raised Lips, Compression Lid Locks, and Oversized Seals for Lid Openings

One key to providing drier storage is to help ensure the lid completely seals. We accomplish this by using a raised lip and compression lock that pulls the lid tight against the oversized rubber seal. Quickly evacuating the water is critical to keeping your gear dry. 

Vector Force™ Transom

Our Vector Force Transom is constructed of .125” aluminum and reinforced with 60% more material than the industry standard. The transom is the very foundation of the boat structure and at Vexus we're focused on ensuring anglers can outfit their rig with today's setback plates and shallow water anchors. Many others not only don't offer these options, but installing them actually voids the warranty.

Hard Case™ Paint with Clearcoat Protection

This new-era, color armor is unrivaled; setting the highest standards for durability, shine, strength, and worry-free maintenance. Plus, it’s a hands-down winner in chemical, gas, scratch, impact, and even salt spray resistance tests. Bow to stern, this performance-proven process means your rig is built to turn heads on and off the water.

SeaStar™ Pro Hydraulic Steering

The fluid feel of SeaStar™ Pro hydraulic steering reinforces the smooth ride and responsive handling of this high-performance design.

Wood-Free Design

Knowing that your AVX doesn't rely on any type of wood reinforcement is more than comforting. It's Wood-Free Confidence that translates into worry-free outings. Now, you can leave the regret of corner-cutting composites and squeaky, rotten plywood far behind.

Available Ski Tow

Family-focused and performance-driven, the AVX1985s is also available with a ski tow for added fun on the water.

Solid State Wiring and Lit Tip Switches

There's no room for cheap, snap locks and failure-prone fuses in our wiring harnesses. Instead, waterproof connectors and resettable breakers are coupled with our heavy-gauge wiring for the ultimate in confidence and reliability.

Infused Fiberglass Consoles, Bow/Side Panels, Livewell, Jump Seats, and Cooler

Touting the smooth, stylish looks and unparalleled, lightweight strength of our Infused Composite Construction™, your AVX is complemented with infused fiberglass consoles, bow/side panels, livewell, jump seats, and a cooler. Bow to stern, it’s a new generation of advanced engineering.

High-Density Polyethylene Flooring

Ultra-durable, easy-to-clean, skid-resistant, and fast-drying… that’s the smooth, custom feel of our high-density polyethylene flooring. You’ll find it throughout the cockpit as standard, and it’s an available option on the front and back decks. It’s an incredible water-wicking material, helping quickly shed moisture while transforming your entire rig into the ultimate fish & play station.

Port and Center Rod Boxes

Protecting today's high-tech rod/reel combos is crucial. Our 8' 6" port and 9' center rod boxes offer a world of storage capacity for all your sticks.

Stainless-Steel Boarding Ladder

A full-size ladder that doesn’t clutter up the back of your boat? Yep, this stainless-steel, retractable design stows out of the way when not in use. Deployed, it features wide, ultra-grip steps, helping make reentry a snap.

Features May Include:

Performance and engineering

• Vexus® V2 Technology
• Available with Power of Choice Professionally Rigged Outboards
• All-Welded AVX High-Performance Hull (.125” thickness-bottom and sides)
• Vector Force™ Solid Transom
• Wide Beam-Forward Design for Increased Front Deck Space
• Dense Base™ Superstructure Design
• Stainless Steel Prop
• Crank Battery includes Battery Tray and Tie-Down
• SeaStar™ Pro Hydraulic Steering
• Flush-Mounted Remote Throttle Control
• Tournament-Grade Fiberglass Livewell with Aeration, Anti-Splash Ring, Divider, and Pump-Out
• Bow Trim and Navigation Light Switches
• Speed, Tach, Fuel, Trim, and Water Pressure Gauges
• Balanced Weight Distribution & Design
• Trac-Tight™ Handling
• 40-Gallon Fuel Tank

Handcrafted details

• Hard Case™ Paint with Clear Coat Protection
• Stretch-Form Gunnels
• Raised-Lip Construction and Weather Trim Seal on Rod Boxes and Storage Compartments
• High-Density Polyethylene on Cockpit Floor
• Custom Painted-to-Match Fiberglass Console
• All Exterior Surfaces Painted
• Large Diameter SS Seat Pedestals
• Marine Grade Carpet
• Fiberglass Control Panel, Bow Panel, and Recessed Trolling Motor Pedal Tray
• Wood-Free Construction

Advanced electronics

• Wide Variety of Custom Factory-Rigged Electronics
• 4-Gauge Trolling Motor Wiring
• Minn Kota Ultrex 80/DSC/MR 52" Trolling Motor
• Storage in Cockpit Floor for (3) Trolling Motor Batteries
• 6 X 3 On-Board Battery Charger
• USB & 12V Power Outlets
• Bilge Pump
• Integrated LED Bow Lights with Removable Stern Navigation Light
• Master Switch and Breakers
• Lit-Tip Toggle Switches with Convenient Resettable Breakers
• LED Light Under Driver Console
• Integrated Horn Assembly

Comfort and convenience

• Driver / Passenger High-Performance Centric Seats with Pedestals
• Fold-Down Fishing Seats (2)
• Molded Fiberglass Jump Seats (2) with Under-Seat Storage / Coolers
• Wide Open Spacious Interior
• Greater Deck, Leg, and Console Room
• Aluminum Decks and Floors
• Compression Lid Latches
• Painted Underside of Lids
• Integrated Cup Holders (6)
• Passenger Rod Rack with Rod Strap
• Stainless Steel Bow and Stern Eyes
• Lockable Storage and Rod Boxes
• Stainless Steel Boarding Ladder
• 3-Position Livewell Control
• Front Deck Step with Storage
• Upright Level Flotation
• Stainless Steel Pop-Up Cleats
• Center Rod and Tackle Storage with Dual Lift Assist
• Port Side Rod Storage
• Integrated Tool Storage at Bow and Front Deck Step
• Injected Closed Cell Foam with Sound Dampening Advantage

Trailer features

• 4" Channel Frame
• 14" Aluminum Wheels with Radial Tires
• Skid-Resistant Step Pads
• Custom-Matched Hard Case™ Painted Fenders with Clear Coat
• Tandem Axle
• Hydraulic Surge Disc Brakes
• LED Lighting with Back-Up Lights
• Trailer Tongue Jack
• Swing-Away Tongue
• Leaf Spring Axles
• Wire Protection Housing
• Forged (not cut) Transverse Channel Support Beams
• Custom-Fitted Bunks
• Integrated Load Guides
• Victor Shield™ UV-Stable Polyurea Coating
• Hybrid Oil Hubs